Gear Aid Aquaseal + FD Flexible Durable Repair Adhesive 0.75 oz.

Repair all types of gear failures with Aquaseal FD. It’s a clear, waterproof urethane adhesive that comes in a handy 0.75 oz tube. After it cures, it becomes a flexible, rubber glue that is ideal for fixing outdoor gear that’s in constant motion. It also offers excellent abrasion resistance. So, when fishing waders rip on the river or a wetsuit tears while diving through prickly corals, don’t throw it away. Fix it with Aquaseal FD. It’s also useful as a seam sealer. Don’t let rips, tears, and holes stop you. Patch it up with the all-purpose Aquaseal FD and stay dry.  

Ideal For:

• Repairing rips and tears in drysuits, jackets, waders, and inflatables
• Creating permanent, flexible seals on neoprene, nylon, GORE-TEX, and vinyl
• Making waterproof repairs that hold up to repeated use and wear

Specs:

• Material: Thermoset urethane
• Sizes: 0.25 oz (Multipack), 0.75 oz, or 8 oz
• Adheres To: Neoprene, rubber, nylon, canvas, vinyl
• Cure Time: 8-12 Hrs (2 Hrs with Cure Accelarator)
• Application Temperature: 60° to 100°F (Above 40% relative humidity)
• Use Temperature: -20° to 180°F
• Storage: Store in bag in freezer
• Made in USA

Instructions:

• Step 1: Clean and prep the area. Thoroughly clean and dry the surface around the tear. Remove dirt, oils, and debris to ensure the adhesive bonds well.
• Step 2: Apply Aquaseal FD. Squeeze a thin, even layer of Aquaseal FD over the tear or hole. Use a brush or applicator to spread it slightly beyond the damaged area. 
• Step 3: Let it cure. Lay the item flat and allow the adhesive to cure for 8–12 hours. For faster results, use Cure Accelerator to speed up the dry time to about 2 hours.
• Step 4: Get back out there. Once fully cured, the flexible, waterproof seal is ready for action — so your gear is too.

Downloadable Instructions